A Comparative Study of GaN‐Based Direct Current and Alternating Current High Voltage Light‐Emitting Diodes. Issue 10 (29th January 2018)

• Record Type: Journal Article
• Authors: Zhou, Shengjun; Gao, Yilin; Zheng, Chenju; Liu, Yingce; Hu, Hongpo; Lv, Jiajiang; Liu, Xingtong
• Other Names: Scholz Ferdinand guestEditor.; Schwarz Ulrich guestEditor.; Vescan Andrei guestEditor.; Wernicke Tim guestEditor.
• Is Part Of: Physica status solidi. Volume 215:Issue 10(2018)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2018-01-29
• Subjects: alternating current -- light‐emitting diodes -- wall‐plug efficiency -- wheatstone bridge; Solid state physics -- Periodicals; Solids -- Industrial applications -- Periodicals; 530.41
• DOI: 10.1002/pssa.201700554
• Languages: English
• ISSNs: 1862-6300

Abstract

Abstract : In this work, one type of direct current high voltage light‐emitting diode (DC‐HV LED) and six types of alternating current high voltage LEDs (AC‐HV LEDs) are demonstrated. Comparative current‐voltage (I–V) and light output power (LOP)‐current (L‐I) characteristics are performed between 24 V DC‐HV LED and 24 V AC‐HV LEDs with eight working cells. The AC‐HV LED has relatively larger wall‐plug efficiency (WPE) than DC‐HV LED over a current density range from 0 to 152 A cm −2 . The effect of the layouts on the optical and electrical properties of AC‐HV LEDs is further investigated. Owing to larger heat dissipation area and fewer number of chips, our combined numerical and experimental results demonstrate that the AC‐HV LED I has a more favorable current spreading uniformity compared to other AC‐HV LEDs. In addition, it is found that the LOP of AC‐HV LEDs is dependent on both the number of working cells and the ratio of radiation area to total chip area. Larger ratio of light emission area to total chip area can be obtained by decreasing the area of rectifier cells. Therefore, in order to achieve a much higher LOP, AC‐HV LEDs have to be designed with smaller area of rectifier cells and with more working cells simultaneously. Abstract : In this work, optical and electrical characteristics of direct current high voltage LEDs (DC‐HV LEDs) and alternating current high voltage LEDs (AC‐HV LEDs) are compared. The AC‐HV LED has a relatively larger wall‐plug efficiency than DC‐HV LED over a specific current density range. It is found that light output power of AC‐HV LEDs is dependent on both the number of working cells and the ratio of radiation area to total chip area.