Holmium Oxide Film as a Saturable Absorber for 2 μm Q-Switched Fiber Laser. (May 2017)

• Record Type: Journal Article
• Authors: Rahman, M. F. A.; Rusdi, M. F. M.; Lokman, M. Q.; Mahyuddin, M. B. H.; Latiff, A. A.; Rosol, A. H. A.; Dimyati, K.; Harun, S. W.
• Is Part Of: Chinese physics letters. Volume 34:Number 5(2017:May)
• Publication Date: 2017-05
• Subjects: 42.55.Wd -- 42.60.Gd -- 42.50.Nn; Physics -- Periodicals; Electronic journals; 530.05
• DOI: 10.1088/0256-307X/34/5/054201
• Languages: English
• ISSNs: 0256-307X

Abstract

Abstract: This work reports on the use of the holmium oxide (Ho 2 O 3 ) polymer film as a saturable absorber (SA) for generating stable Q-switching pulses operating in a 2-μm region in a thulium-doped fiber laser cavity. The SA is prepared by diluting a commercial Ho 3 O 2 powder and then mixing it with polyvinyl alcohol (PVA) solution to form a Ho 2 O 3 -PVA film. A tiny part of the film about 1 mm×1 mm in size is sandwiched between two fiber ferrules with the help of index matching gel. When incorporated in a laser cavity driven by a 1552-nm pump, stable Q-switching pulses are observed at 1955 nm within the pump power range of 363–491 mW. As the pump power increases within this range, the repetition rate rises from 26 kHz to 39 kHz, as the pulse width drops from 4.22 μs to 2.57 μs. The laser operates with a signal-to-noise ratio of 47 dB, and the maximum output power and the pulse energy obtained are 2.67 mW and 69 nJ, respectively. Our results successfully demonstrate that the Ho 2 O 3 film can be used as a passive SA to generate a 2-μm pulse laser .