Temperature and Pressure Evolution during Al Alloy Solidification at Different Squeeze Pressures. Issue 1 (May 2015)

• Record Type: Journal Article
• Authors: Li, Junwen; Zhao, Haidong; Chen, Zhenming
• Is Part Of: IOP conference series. Volume 84:Issue 1(2015)
• Publication Date: 2015-05
• Subjects: Materials science -- Periodicals; 620.1105
• DOI: 10.1088/1757-899X/84/1/012057
• Languages: English
• ISSNs: 1757-8981

Abstract

Abstract: Squeeze casting is an advanced and near net-shape casting process, in which external high pressure is applied to solidifying castings. The castings are characterized with fine grains and good mechanical properties. In this study, a series of experiments were carried out to measure the temperature and pressure histories in cavity of Al-Si-Mg direct squeeze castings with different applied solidification pressures of 0.1, 50, 75, and 100 MPa. The evolution of the measured temperatures and pressures was compared and discussed. The effect of pressure change on formation of shrinkage defects was analyzed. Further the friction between the castings and dies during solidification was calculated. It is shown that the applied squeeze pressure has significant influence on the friction at die and casting interfaces, which affects the pressure evolution and transmission. The results could provide some benchmark data for future thermal-mechanics coupled modeling of squeeze castings.