Effect of molarity in geo polymer earth brick reinforced with fibrous coir wastes using sandy soil and quarry dust as fine aggregate. (Case study). (June 2018)

• Record Type: Journal Article
• Authors: Palanisamy, P.; Kumar, P. Suresh
• Is Part Of: Case studies in construction materials. Volume 8(2018)
• Page Start: 347
• Page End: 358
• Publication Date: 2018-06
• Subjects: Fiber reinforced geo-polymer earth brick -- Geo-polymer mortar using sandy soil and quarry dust as fine-aggregate -- Nature fibrous coir wastes -- Un-burnt brick -- Alternate to compressed stabilized earth block; Building materials -- Case studies -- Periodicals; 691.05
• DOI: 10.1016/j.cscm.2018.01.009
• Languages: English
• ISSNs: 2214-5095

Abstract

Abstract: The studies are mainly carried out on strength development for various grades of geo-polymer mortar with varying molarity (M) for producing geo-polymer earth brick (GPEB). The studies are focused on use of more sandy soil sieved from the raw earth available at site and quarry dust on replaced with river sand for making the un-burnt brick. The brick is reinforced with fibrous coir waste to increase shear strength and further pressed by hand compaction. Geo-polymer mortar is based on an inorganic alumina silicate binder system and it has more advantages of quick strength gain, negligence of water curing, best mechanical properties, eco-friendly, sustainable and alternate to ordinary Portland cement (OPC) based mortar. Fly Ash (FA), Ground Granulated Blast-furnace Slag (GGBS), sandy soil sieved from earth and Quarry Dust (QD) are mixed with alkaline solution in different molarities 6 M, 8 M and 10 M to prepare specimens. Specimens are tested against workability, compressive strength, and water absorption test, rate of water absorption, abraded test and also fiber content of the brick. The research found that the brick is made by FA & GGBS as binders and soil & quarry dust as fine aggregate in ratio of 0.5:0.5:1.75:0.25 with fibrous coir waste 1% and alkaline solution 10 M for preparing mortar to produce, excellent compressive strength, low water absorption, low rate of absorption, good abrasive resistance etc., The new brick is placed an alternate to compressed stabilized earth block, cement block and traditional burnt brick.