Properties and characterization of ([Mengkuang leaf fiber]‐filled ethylene vinyl acetate)/(natural rubber) blend: Effects of blending sequences and mengkuang leaf fiber loading. Issue 2 (20th January 2016)

• Record Type: Journal Article
• Authors: Hashim, Faiezah; Ismail, Hanafi; Rusli, Arjulizan
• Is Part Of: Journal of vinyl & additive technology. Volume 24:Issue 2(2018)
• Page Start: 109
• Page End: 115
• Publication Date: 2016-01-20
• Subjects: Vinyl polymers -- Periodicals; Plastics -- Additives -- Periodicals; 668.4236
• DOI: 10.1002/vnl.21533
• Languages: English
• ISSNs: 1083-5601

Abstract

Abstract : (Ethylene vinyl acetate [EVA])/(natural rubber [NR])/(Mengkuang leaf fiber) (MLF) thermoplastic elastomer composites were prepared by using three different blending sequences in an internal mixer. The blending sequences studied were (i) B1: NR was added followed by MLF into the molten EVA; (ii) B2: MLF was added followed by NR into the molten EVA; (iii) B3: MLF was added followed by EVA into the molten NR. The effect of different blending sequences and fiber loadings from 10 to 40 parts by weight per hundred parts of resin on the torque development, tensile properties, thermal degradation, and morphology of EVA/NR/MLF composites was studied. Of the blending sequences investigated, the B1 system is considered the best method for the preparation of EVA/NR/MLF composites. The B1 system produces composites with lower stabilization torque, higher tensile strength, and better thermal stability compared with other systems. At 40 parts by weight per hundred parts of resin of MLF loading, the tensile strength of the composite prepared by using the B1 system was 15% higher than that of B2 system composites, and 8% higher than that of the B3 system. Scanning electron micrographs of the tensile fracture surfaces indicated this system also had good fiber dispersion in the EVA/NR matrix. An increase in MLF loading resulted in an increase of the values of the stabilization torque and the Young's modulus, but a decrease in values of the tensile strength, the elongation at break, and the thermal stability of the composites. Scanning electron microscopy revealed increased fiber pullout in the composites as the loading increased. J. VINYL ADDIT. TECHNOL., 24:109–115, 2018. © 2016 Society of Plastics Engineers