InAlGaN/GaN with AlGaN back-barrier HEMT technology on SiC for Ka-band applications. Issue 1 (27th November 2017)

• Record Type: Journal Article
• Authors: Piotrowicz, Stéphane; Jacquet, Jean-Claude; Gamarra, Piero; Patard, Olivier; Dua, Christian; Chartier, Eric; Michel, Nicolas; Oualli, Mourad; Lacam, Cedric; Potier, Clément; Altuntas, Philippe; Delage, Sylvain
• Editors: Fourn, Erwan
• Is Part Of: International journal of microwave and wireless technologies. Volume 10:Issue 1(2018)
• Page Start: 39
• Page End: 46
• Publication Date: 2017-11-27
• Subjects: InAlGaN HEMT, -- Power Devices, -- Power characterizations; Wireless communication systems -- Periodicals; Microwave circuits -- Periodicals; Radio frequency -- Periodicals; 621.381305
• DOI: 10.1017/S175907871700112X
• Languages: English
• ISSNs: 1759-0787

Abstract

Abstract : This paper presents performances achieved with InAlGaN/GaN HEMTs with 0.15 µm gate length on SiC substrate. Technology Computer Aided Design simulations were used to optimize the heterostructure. Special attention was paid to the design of the buffer structure. I-V measurements with DC and pulsed bias voltages were performed. CW measurements at millimeter waves were also carried out and are detailed in the following sections. The technology, optimized for power applications up to 45 GHz, demonstrates a current gain cut-off frequency FT of 70 GHz and a maximum available gain cut-off frequency FMAG of 140 GHz. CW Load-pull power measurements at 30 GHz enable to achieve a maximum PAE of 41% associated with an output power density of 3.5 W/mm when biased at VDS = 20 V. These devices, with an improved buffer structure show, reduced recovery time in pulsed operating conditions. These improved characteristics should have a positive impact for pulsed or modulated signal applications.