Effect of Aramid Pulp and Lapinas Fiber on the Friction and Wear Behavior of NBR Powder–Modified Phenolic Resin Composite. Issue 3 (3rd May 2016)

• Record Type: Journal Article
• Authors: Ghosh, Prosenjit; Ghosh, Dipankar; Khastgir, Dipak; Chaki, Tapan Kumar
• Is Part Of: Tribology transactions. Volume 59:Issue 3(2016)
• Page Start: 391
• Page End: 398
• Publication Date: 2016-05-03
• Subjects: Composite -- friction -- wear -- aramid -- lapinas; Tribology -- Periodicals; 621
• DOI: 10.1080/10402004.2015.1081999
• Languages: English
• ISSNs: 1040-2004

Abstract

ABSTRACT: Short fiber reinforcement plays a definite role in governing the performance of a composite through the improvement of different material properties. The present investigation deals with the effect of aramid pulp and lapinas fiber on the friction and wear characteristics of a composite made from phenolic resin modified by powdered acrylonitrile butadiene rubber (NBR) on a pin-on-disc tribometer. Four composites, containing 10, 20, 30, and 40 wt% of aramid pulp with respect to phenolic resin content, were prepared. Another four composites, containing 50, 100, 200, and 300 wt% of lapinas fiber with respect to phenolic resin content, were also made. It was found that the two different fibers have distinctly different contributions to the friction and wear properties of the composites. It was also found that the incorporation of aramid pulp enhances friction stability of the composites much better than that of lapinas fiber. The change in surface morphology of these composites was studied by scanning electron microscopy (SEM) before and after the friction test. SEM images of friction samples containing aramid pulp corroborated the occurrence of wear through an adhesive wear mechanism, whereas the lapinas fiber–containing composites showed an abrasive wear mechanism.