Control rules of surface integrity and formation of metamorphic layer in high-speed milling of 7055 aluminum alloy. (February 2015)

• Record Type: Journal Article
• Authors: Yao, Changfeng; Zuo, Wei; Wu, Daoxia; Ren, Junxue; Zhang, Dinghua
• Is Part Of: Proceedings of the Institution of Mechanical Engineers. Volume 229:Number 2(2015:Feb.)
• Page Start: 187
• Page End: 204
• Publication Date: 2015-02
• Subjects: 7055 Aluminum alloy -- surface roughness -- surface topography -- surface residual stresses -- surface micro-hardness -- metamorphic layer; Mechanical engineering -- Periodicals; Engineering -- Management -- Periodicals; Manufacturing processes -- Periodicals; 629.8
• DOI: 10.1177/0954405414527268
• Languages: English
• ISSNs: 0954-4054

Abstract

Orthogonal experiments were conducted to investigate the effects of parameters on surface integrity in milling 7055 aluminum alloy. In order to correlate metamorphic layer with thermal and mechanical phenomena developed during milling, milling force and temperature fields of machined surface were obtained with finite element method, while milling speed and feed per tooth were paid particular attention to study formation of metamorphic layer. Experiment results show that when milling speed, feed per tooth, milling depth, and milling width are 1100 m/min, 0.02 mm/z, 0.7 mm, and 6 mm, respectively, obtained surface roughness, surface residual stress in X direction, surface residual stress in Y direction, and surface micro-hardness are Ra 0.258 µm, −123 MPa, −137 MPa, and 193.76 HV0.025, respectively. From precision machining to rough machining, depth of compressive residual stress layer increases from 35 to 45 µm, and the depth of plastic deformation layer increases from 5 to 20 µm. Finally, the formation of metamorphic layer can be explained by thermo-mechanical coupling effects.