Study of water wetting and water layer thickness in oil-water flow in horizontal pipes with different wettability. (29th June 2018)

• Record Type: Journal Article
• Authors: Paolinelli, L.D.; Rashedi, A.; Yao, J.; Singer, M.
• Is Part Of: Chemical engineering science. Volume 183(2018)
• Page Start: 200
• Page End: 214
• Publication Date: 2018-06-29
• Subjects: Oil-water pipe flow -- Pipe wettability -- Corrosion -- Dispersed flow -- Droplet size -- Modeling; Chemical engineering -- Periodicals; Génie chimique -- Périodiques; Chemical engineering; Periodicals; Electronic journals; 660
• DOI: 10.1016/j.ces.2018.03.023
• Languages: English
• ISSNs: 0009-2509

Abstract

Highlights: Water wetting was studied in pipes with different wettability in oil-water flow. Pipe wettability plays a very important role in the oil wet to water wet transition. Droplet sticking and spreading are the main mechanisms for segregation in a hydrophilic pipe. Poor surface wettability hinders droplet sticking and spreading in a hydrophobic pipe. Segregation in a hydrophobic pipe occurs when local droplet accumulation is critical. Abstract: Two-phase oil-water pipe flow is common in oil production and transportation. Appropriate estimation of phase wetting (oil wet or water wet) of internal pipe walls can significantly reduce corrosion control costs, and increase confidence in measures taken to ensure the integrity of pipelines. Water wetting can be avoided by fully dispersing the water phase into the oil phase. It has been suggested that pipe wettability may affect oil-water flow patterns; particularly, water-in-oil dispersed flow transition boundaries. However, there are no systematic studies in the literature on this matter for carbon steel pipes, which are the preferable choice for economic reasons in the oil and gas industry. Moreover, traditional and widely used models to predict the onset of dispersed flow do not consider the effect of pipe wettability. This work studies phase wetting and water layer thickness in large scale oil-dominated oil-water horizontal flow in carbon steel and PVC pipes of similar internal diameter (0.1 m) and roughness, but different wettability. The effect of wetting hysteresis (oil or water pre-wetted pipe surface) on phase wetting is also investigated. It is demonstrated that pipe wettability plays a very important role on the transition boundaries for phase wetting (oil wet to water wet) and the transition to fully dispersed flow. Water droplet deposition and spreading are identified as the main mechanisms for incipient segregation in a hydrophilic pipe. In a hydrophobic pipe, poor surface wettability hinders the sticking and spreading of water droplets. Water wetting in a hydrophobic pipe requires a sufficient low flow velocity at which local droplet accumulation and coalescence becomes the dominant segregation mechanism. Predictions from available hydrodynamic models are compared with the experimental results and recommendations are provided.