Synthesis of novel cyclosiloxane monomers containing push–pull moieties and their anionic ring opening polymerization. Issue 14 (16th February 2018)

• Record Type: Journal Article
• Authors: Perju, Elena; Cuervo-Reyes, Eduardo; Shova, Sergiu; Opris, Dorina M.
• Is Part Of: RSC advances. Volume 8:Issue 14(2018)
• Page Start: 7569
• Page End: 7578
• Publication Date: 2018-02-16
• Subjects: Chemistry -- Periodicals; 540.5
• DOI: 10.1039/c8ra00707a
• Languages: English
• ISSNs: 2046-2069

Abstract

Abstract : The synthesis of polysiloxanes modified with a nitroaniline or with a Disperse Red 1 push–pull group and their dielectric properties are reported. Abstract : The synthesis of three novel tetracyclosiloxane monomers modified either with a nitroaniline (NA) or with a Disperse Red 1 (DR1) push–pull group and their ring opening polymerization reaction in the presence of tetramethylammonium hydroxide are presented. The prepared monomers and polymers were characterized by different spectral methods and gel permeation chromatography. For the crystalline monomers, the structures were further proven by single crystal X-ray diffraction. Dynamic scanning calorimetry shows that the polymers that carry NA groups have a glass transition temperature ( T g ) well below room temperature (RT), while the one that carries DR1 groups melts at 55 °C. The transition temperatures have a strong effect on permittivity as indicated by broadband impedance spectroscopy measurements conducted at different temperatures and frequencies. The polymers modified with NA groups have a high permittivity (maximum value of 17.3) at RT, suggesting the polar groups to be mobile and orientation polarization to be effective. However, the polar groups of the polymer modified with DR1 are frozen and thus cannot contribute to the permittivity via orientation polarization. Consequently, the permittivity is only 8.8 at RT, but increases to 22 above the melting temperature, where the dipoles are mobile. Because of the high dielectric permittivity and rather low T g, the polymers modified with NA are attractive as active dielectric materials in actuators, capacitors, and stretchable electronics, whereas the polymer modified with DR1 may be of interest in nonlinear optical devices.