Effect of active rubber powder on structural two-component epoxy resin and its mechanical properties. Issue 14 (18th July 2018) - Müller, M.
Abstract: The aim of the research was to investigate a possibility to use active rubber powder (ARP) from a process of tyres recyclation in an area of a filler into a reactoplastics matrix applied in structural adhesive bonds. This study focuses on an analysis of a tensile strength, a shear impact strength and a hardness of the composite mixture itself and further on the interaction with an adhesive bonded material, i.e. it evaluates an influence of different ratio of ARP on the adhesive bond strength. Effects of the cyclic degradation environment combining the decreased temperature −40 °C and the increased temperature 90 °C at the simultaneous acting of the increased moisture up 90% is a part of the research. The tensile strength and the hardness were decreased by adding ARP. The experiment results proved a positive effect of ARP in the area of adhesive bonds exposed to the cyclic degradation at increased and decreased temperatures. Elastic ARP is able to absorb an inner tension in the layer of the adhesive bond.