Investigation of enhancing effect of nano-montmorillonite on fire-retardant added low-density polyethylene–ethylene vinyl acetate hybrid system. (November 2014)

• Record Type: Journal Article
• Authors: Bee, Soo-Tueen; Hassan, A; Ratnam, CT; Tee, Tiam-Ting; Sin, Lee Tin
• Is Part Of: Journal of thermoplastic composite materials. Volume 27:Number 11(2014)
• Page Start: 1515
• Page End: 1529
• Publication Date: 2014-11
• Subjects: Alumina trihydrate -- polyethylene -- ethylene vinyl acetate -- montmorillonite -- flame retardancy -- electrical resistivity; Thermoplastic composites -- Periodicals; 668.423
• DOI: 10.1177/0892705712474978
• Languages: English
• ISSNs: 0892-7057

Abstract

In this study, nano-montmorillonite (NMMT) was incorporated in alumina trihydrate (ATH) added low-density polyethylene–ethylene vinyl acetate (LDPE-EVA) for enhancing the mechanical and electrical properties of the hybrid blends. The Young's modulus of 50 phr ATH added LDPE-EVA (LE) blends has improved significantly, when the NMMT loading level increased from 5 to 15 phr. This is because the intercalation of NMMT particles reduces the cavities while enhancing the interfacial adhesion between the particle surface and LE matrix as observed via morphology analysis. The good interfacial adhesion could effectively transfer the stress from polymer matrix to filler's particles during straining and improved the mechanical properties. On the other hand, the volume resistivity of 5 phr added LE blends was gradually decreased as the loading level of ATH has increased from 50 to 150 phr. The surface and volume resistivity of LE blends exhibited that high polarity of ATH and NMMT molecules could increase the mobility of charges in passages through polymer matrix and surface. Thus, the incorporation of ATH and NMMT could reduce the electrical resistance of LE blends. In addition, the increasing of ATH loading level also improved fire resistivity of LE blends as indicated by the promising limiting oxygen index. This is because the endothermic reaction of ATH during combustion process could reduce the temperature of polymer blends while releasing water vapour and the formation of alumina char. Furthermore, the increasing of NMMT loading level in ATH-added LE blends was found to slightly increase the fire retardancy. This is due to the addition of NMMT that could promote the dripping characteristics and charring effect during combustion and subsequently improve the fire retardancy of ATH added LE blends.