Polymer nano-foams for insulating applications prepared from CO2 foaming. (February 2015)

• Record Type: Journal Article
• Authors: Forest, C.; Chaumont, P.; Cassagnau, P.; Swoboda, B.; Sonntag, P.
• Is Part Of: Progress in polymer science. Volume 41(2015:Feb.)
• Page Start: 122
• Page End: 145
• Publication Date: 2015-02
• Subjects: Nano-cell -- Nano-foams -- CO2 -- Thermal conductivity -- Polymer foams -- Knudsen effect; Polymers -- Periodicals; Polymerization -- Periodicals; Polymers -- Industrial applications -- Periodicals; Polymères -- Périodiques; Polymérisation -- Périodiques; 547.7
• DOI: 10.1016/j.progpolymsci.2014.07.001
• Languages: English
• ISSNs: 0079-6700

Abstract

Abstract: Aspects of the modeling of the thermal conductivity of polymer foams and a CO2 foaming process for the preparation of micro/nano-cellular polymer materials for insulating applications are reviewed. Generally speaking, the thermal conductivity of polymer foams is higher than that of air. However, it can be expected the Knudsen effect will give nano-cells the thermal insulation properties of aerogels. An analytical model of heat transfer in polymer foams may be used to predict the influence of the foam density and of the cell size on the thermal conductivity of polymer foams. This model derived from aerogel studies suggests the optimal foam density (0.1–0.2 g cm −3 ) and cell size (<100 nm) required to obtain a polymer foam with an effective thermal conductivity lower than that of air. Foaming processes with CO2 are reviewed from an experimental perspective. Two different CO2 processes are generally investigated: (1) a single-stage process where the nucleation is induced by pressure drop quenching after a saturation stage at 'high' temperature under supercritical conditions (foaming process by extrusion, for example) and (2) a two-stage batch process with pressure or thermal quenching to induce cell nucleation and growth after a saturation stage at 'low' temperature under gaseous/supercritical conditions. This review is mainly devoted to the former process. The current challenge in batch CO2 foaming consists in decreasing the foam densities while keeping cell size lower than 100 nm. For that purpose nucleation must be preferred to increase the cell density up to 10 15 cm −3 . One way to increase the nucleation is to combine the effects of different nucleating agents to alter the heterogeneous nucleation phenomenon. The nano-structuration of polymers, via block copolymers or nano-fillers, offers a new and original way to fabricate nano-foams with a thermal conductivity lower than that of air. However, some challenges still need to be theoretically and experimentally investigated. On the other hand, if some goals can be met by samples obtained on the lab scale, the scale-up of this foaming process to the pilot and industrial scales is another exciting challenge.