Experimental investigation into the mechanism of the polygonal wear of electric locomotive wheels. Issue 6 (3rd June 2018)

• Record Type: Journal Article
• Authors: Tao, Gongquan; Wang, Linfeng; Wen, Zefeng; Guan, Qinghua; Jin, Xuesong
• Is Part Of: Vehicle system dynamics. Volume 56:Issue 6(2018)
• Page Start: 883
• Page End: 899
• Publication Date: 2018-06-03
• Subjects: Electric locomotive -- polygonal wear -- wheels out-of-round -- vibration test; Motor vehicles -- Dynamics -- Periodicals; Electronic journals; 629.231
• DOI: 10.1080/00423114.2017.1399210
• Languages: English
• ISSNs: 0042-3114

Abstract

ABSTRACT: Experiments were conducted at field sites to investigate the mechanism of the polygonal wear of electric locomotive wheels. The polygonal wear rule of electric locomotive wheels was obtained. Moreover, two on-track tests have been carried out to investigate the vibration characteristics of the electric locomotive's key components. The measurement results of wheels out-of-round show that most electric locomotive wheels exhibit polygonal wear. The main centre wavelength in the 1/3 octave bands is 200 mm and/or 160 mm. The test results of vibration characteristics indicate that the dominating frequency of the vertical acceleration measured on the axle box is approximately equal to the passing frequency of a polygonal wheel, and does not vary with the locomotive speed during the acceleration course. The wheelset modal analysis using the finite element method (FEM) indicates that the first bending resonant frequency of the wheelset is quite close to the main vibration frequency of the axle box. The FEM results are verified by the experimental modal analysis of the wheelset. Moreover, different plans were designed to verify whether the braking system and the locomotive's adhesion control have significant influence on the wheel polygon or not. The test results indicate that they are not responsible for the initiation of the wheel polygon. The first bending resonance of the wheelset is easy to be excited in the locomotive operation and it is the root cause of wheel polygon with centre wavelength of 200 mm in the 1/3 octave bands.