The influence of computational assumptions on analysing abdominal aortic aneurysm haemodynamics. (August 2014)

• Record Type: Journal Article
• Authors: Ene, Florentina; Delassus, Patrick; Morris, Liam
• Is Part Of: Proceedings of the Institution of Mechanical Engineers. Volume 228:Number 8(2014:Aug.)
• Page Start: 768
• Page End: 780
• Publication Date: 2014-08
• Subjects: Abdominal aortic aneurysms -- haemodynamics -- finite element method -- computational fluid dynamics -- fluid–structure interaction -- von Mises stresses -- computational cost; Biomedical engineering -- Periodicals; Medical instruments and apparatus -- Periodicals; 610.28
• DOI: 10.1177/0954411914546122
• Languages: English
• ISSNs: 0954-4119

Abstract

The variation in computational assumptions for analysing abdominal aortic aneurysm haemodynamics can influence the desired output results and computational cost. Such assumptions for abdominal aortic aneurysm modelling include static/transient pressures, steady/transient flows and rigid/compliant walls. Six computational methods and these various assumptions were simulated and compared within a realistic abdominal aortic aneurysm model with and without intraluminal thrombus. A full transient fluid–structure interaction was required to analyse the flow patterns within the compliant abdominal aortic aneurysms models. Rigid wall computational fluid dynamics overestimates the velocity magnitude by as much as 40%−65% and the wall shear stress by 30%−50%. These differences were attributed to the deforming walls which reduced the outlet volumetric flow rate for the transient fluid–structure interaction during the majority of the systolic phase. Static finite element analysis accurately approximates the deformations and von Mises stresses when compared with transient fluid–structure interaction. Simplifying the modelling complexity reduces the computational cost significantly. In conclusion, the deformation and von Mises stress can be approximately found by static finite element analysis, while for compliant models a full transient fluid–structure interaction analysis is required for acquiring the fluid flow phenomenon.