Cr3C2 incorporation into an Inconel 625 laser cladded coating: Effects on matrix microstructure, mechanical properties and local scratch resistance. (15th February 2015) - Verdi, D.
Highlights: Indentation and scratch tests were performed on Inconel 625 and cermet matrix. A correlation between microstructure and mechanical properties was studied. Plastic deformation was the main wear mechanism of both coatings. Abstract: There is an increasing industrial demand for metal alloys with high wear resistance under severe operating conditions. Ni-based alloys, such as Inconel superalloys, are an excellent option for these applications; however, their use is limited by their high cost. Ni-based coatings deposited onto carbon steel substrates are being developed to achieve desired surface properties with reduced cost. Laser cladding deposition has emerged as an excellent method for processing Ni based coatings. In this work, microstructure, mechanical properties and local wear behaviour have been investigated in response to the addition of Cr3 C2 ceramic particles into an Inconel 625 alloy deposited onto a ferritic steel substrate by laser cladding. Using this deposition technique, a homogeneous distribution of Cr3 C2 particles was observed in the coating microstructure. The addition of ceramic particles to the starting powder resulted in the formation of hard precipitates in the coating microstructure. The partial dissolution of Cr3 C2 particles during the laser cladding process increased the hardness of the Inconel 625 matrix. Depth sensing indentation and scratch tests were performed to study the local wear behaviour and scratch resistance of the cermet matrix compared with the conventional Inconel 625 alloy. Finally, the effect of Cr3 C2 on mechanical properties was correlated with the observed microstructure modifications.