Effects of the shape of small flaws and damage due to a focused ion beam on the fatigue strength characteristics of annealed medium‑carbon steel. (May 2018)

• Record Type: Journal Article
• Authors: Sakamoto, Junji; Hamada, Shigeru; Noguchi, Hiroshi
• Is Part Of: Engineering failure analysis. Volume 87(2018)
• Page Start: 49
• Page End: 68
• Publication Date: 2018-05
• Subjects: Fatigue strength -- Small flaw -- Small fatigue crack behavior -- Damaged layer -- Focused ion beam; System failures (Engineering) -- Periodicals; Fracture mechanics -- Periodicals; Reliability (Engineering) -- Periodicals; Pannes -- Périodiques; Rupture, Mécanique de la -- Périodiques; Fiabilité -- Périodiques; Fracture mechanics; Reliability (Engineering); System failures (Engineering); Periodicals; Electronic journals; 620.112
• DOI: 10.1016/j.engfailanal.2018.02.005
• Languages: English
• ISSNs: 1350-6307

Abstract

Abstract: Fatigue tests and hardness tests were conducted in order to clarify the effects of the shapes of small flaws and damage caused by a focused ion beam (FIB) on the fatigue strength characteristics of annealed medium‑carbon steel. The notch root radius of the flaw at the branch point dominates the type of the fatigue limit and was found to be approximately 50 μm, a value that was significantly smaller than the 500 μm of two-dimensional notches in steel. The effect of the FIB-damaged layer on fatigue crack initiation from the FIB-milled notch in the steel was negligible. Moreover, the present study indicated that the effect of the FIB-damaged layer on the fatigue crack initiation at the FIB-milled notch could be evaluated simply by using a hardness test for the other materials and FIB conditions. Highlights: Effect of flaw shape on fatigue strength in annealed medium‑carbon steel is studied. The flaw root radius at the branch point in fatigue limit is approximately 50 μm. Effect of FIB-damaged layer on fatigue crack initiation from an FIB-notch is studied. The effect in annealed medium‑carbon steel can be considered to be negligible. We indicate the effect could be evaluated simply by using a hardness test.