Ultrathin Planar Microlens Arrays Based on Geometric Metasurface. Issue 2 (13th November 2017) - Jin, Jinjin
Abstract: Ascribing to the properties of two dimensional parallel focusing and imaging, low propagation loss, integration and miniaturization, microlens array has been widely used in imaging, optical communication, organic light emitting devices, adaptive optics, photolithography, biomedical and other applications. However, the existing traditional microlens array suffers from difficulty in fabrication, large‐thickness, curved surface, non‐uniformity of light spots, or requirement of additional discrete components to control the microlens. Herein, a planar microlens array is experimentally demonstrated based on the geometric metasurface. The single microlens is composed of space‐variant subwavelength metallic gratings with high polarization conversion efficiency and thus exhibits gradient phase distribution. The focused spot diameter of 22.5 μm with radius of 350 μm, focal length of 1 cm and the light spots intensity uniformity of 0.9885 (standard deviation 0.0115) at the focal plane are obtained. Moreover, the broadband property of microlens array is also confirmed. The novel design strategy for microlens array would facilitate the miniaturization of optical devices and be easily integrated in the optical interconnected devices. Abstract : The microlens array is realized by the ultrathin metasurface, which posses numerous merits including ultrathin (≈λ/10), flat and flexible. Experiment results indicate the uniformity of the focus spots generated by the microlens is high up to 0.9885. This approach may facilitate the applications of the metasurface and advance the high integration of the parallel optical systems.