Evaluation of the petroleum composition and quality with increasing thermal maturity as simulated by hydrous pyrolysis: A case study using a Brazilian source rock with Type I kerogen. (June 2015)

• Record Type: Journal Article
• Authors: Spigolon, André L.D.; Lewan, Michael D.; de Barros Penteado, Henrique L.; Coutinho, Luiz Felipe C.; Mendonça Filho, João G.
• Is Part Of: Organic geochemistry. Volume 83/84(2015)
• Page Start: 27
• Page End: 53
• Publication Date: 2015-06
• Subjects: Brazilian Type I kerogen -- Hydrous pyrolysis -- Thermal maturation -- Generation and expulsion -- Petroleum composition and quality -- API gravity -- Sulfur content -- Asphaltenes -- Saturates -- Gas/oil ratio; Organic geochemistry -- Periodicals; Biogeochemistry -- Periodicals; Géochimie organique -- Périodiques; 553.205
• DOI: 10.1016/j.orggeochem.2015.03.001
• Languages: English
• ISSNs: 0146-6380

Abstract

Highlights: Petroleum generation and expulsion were simulated by hydrous pyrolysis. This process occurs in two steps: kerogen to bitumen then hydrocarbon rich oil. Higher temperatures combined with longer times control the bitumen decomposition. Thermal cracking of resins and asphaltenes results in the significant increase of hydrocarbons. The oil quality is enhanced with higher API gravity and lower sulfur content. Abstract: Hydrous pyrolysis (HP) experiments were used to investigate the petroleum composition and quality of petroleum generated from a Brazilian lacustrine source rock containing Type I kerogen with increasing thermal maturity. The tested sample was of Aptian age from the Araripe Basin (NE-Brazil). The temperatures (280–360 °C) and times (12–132 h) employed in the experiments simulated petroleum generation and expulsion (i.e., oil window) prior to secondary gas generation from the cracking of oil. Results show that similar to other oil prone source rocks, kerogen initially decomposes in part to a polar rich bitumen, which decomposes in part to hydrocarbon rich oil. These two overall reactions overlap with one another and have been recognized in oil shale retorting and natural petroleum generation. During bitumen decomposition to oil, some of the bitumen is converted to pyrobitumen, which results in an increase in the apparent kerogen (i.e., insoluble carbon) content with increasing maturation. The petroleum composition and its quality (i.e., API gravity, gas/oil ratio, C15+ fractions, alkane distribution, and sulfur content) are affected by thermal maturation within the oil window. API gravity, C15+ fractions and gas/oil ratios generated by HP are similar to those of natural petroleum considered to be sourced from similar Brazilian lacustrine source rocks with Type I kerogen of Lower Cretaceous age. API gravity of the HP expelled oils shows a complex relationship with increasing thermal maturation that is most influenced by the expulsion of asphaltenes. C15+ fractions (i.e., saturates, aromatics, resins and asphaltenes) show that expelled oils and bitumen are compositionally separate organic phases with no overlap in composition. Gas/oil ratios (GOR) initially decrease from 508–131 m 3 /m 3 during bitumen generation and remain essentially constant (81–84 m 3 /m 3 ) to the end of oil generation. This constancy in GOR is different from the continuous increase through the oil window observed in anhydrous pyrolysis experiments. Alkane distributions of the HP expelled oils are similar to those of natural crude oils considered to be sourced from similar Brazilian lacustrine source rocks with Type I kerogen of Lower Cretaceous age. Isoprenoid and n -alkane ratios (i.e., pristane/ n -C17 and phytane/ n -C18 ) decrease with increasing thermal maturity as observed in natural crude oils. Pristane/phytane ratios remain constant with increasing thermal maturity through the oil window, with ratios being slightly higher in the expelled oils relative to those in the bitumen. Generated hydrocarbon gases are similar to natural gases associated with crude oils considered to be sourced from similar Brazilian lacustrine source rocks with Type I kerogen of Lower Cretaceous, with the exception of elevated ethane contents. The general overall agreement in composition of natural and hydrous pyrolysis petroleum of lacustrine source rocks observed in this study supports the utility of HP to better characterize petroleum systems and the effects of maturation and expulsion on petroleum composition and quality.