A novel time reversal sub‐group imaging method with noise suppression for damage detection of plate‐like structures. Issue 3 (17th November 2017)

• Record Type: Journal Article
• Authors: Gao, Weihang; Zhang, Guangmin; Li, Hongnan; Huo, Linsheng; Song, Gangbing
• Is Part Of: Structural control and health monitoring. Volume 25:Issue 3(2018)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2017-11-17
• Subjects: damage detection -- lead zirconate titanate (PZT) -- noise suppression -- structural health monitoring -- time reversal imaging (TRI); Structural engineering -- Periodicals; Structural control (Engineering) -- Periodicals; Automatic data collection systems -- Periodicals; Detectors -- Periodicals; 624.17
• DOI: 10.1002/stc.2111
• Languages: English
• ISSNs: 1545-2255

Abstract

Summary: In this paper, a new time reversal imaging (TRI) algorithm with noise suppression is developed for the application of imaged based structural damage detection of plate‐like structures. The conventional TRI method suffers from performance degradation in high noise condition. The proposed method addresses the aforementioned issues. First, an array of detection transducers is used and is divided into several subgroups. Then, the echo signals of the subgroups are time reversed and reemitted via numerical computation. Finally, the cross‐correlation functions of the summation of refocused time reversed signals in each subgroup are obtained to locate damages. The time reversed signals at the reference time are irrelevant to the noise, meanwhile, the multiple refocused signals in each subgroup are first added and then cross‐correlated. Therefore, the proposed method can effectively suppress noise. To validate the effectiveness of proposed method, 2 experiments were performed. The 2 experiments involved 2 aluminum plate specimens. Each specimen was equipped with 4 surface‐bonded lead zirconate titanate transducers. One specimen involved a simulated damage (an addition of a mass), and the other one involved an actual through‐hole damage. The experimental performances of the proposed method are compared to those of the conventional TRI method. The imaging results demonstrated that the damage on both specimens was clearly displayed with high spatial resolution by the proposed method even under the low signal‐to‐noise ratio condition. On the contrary, the location of the damage computed by the conventional TRI method was submerged in noise and cannot be distinguished.