Leaching of Au, Ag, and Pd from waste printed circuit boards of mobile phone by iodide lixiviant after supercritical water pre-treatment. (July 2015)

• Record Type: Journal Article
• Authors: Xiu, Fu-Rong; Qi, Yingying; Zhang, Fu-Shen
• Is Part Of: Waste management. Volume 41(2015)
• Page Start: 134
• Page End: 141
• Publication Date: 2015-07
• Subjects: Waste printed circuit board -- Gold -- Leaching -- Iodide -- Supercritical water; Hazardous wastes -- Periodicals; Refuse and refuse disposal -- Periodicals; 363.728
• DOI: 10.1016/j.wasman.2015.02.020
• Languages: English
• ISSNs: 0956-053X

Abstract

Highlights: We report a novel process for recovering Au, Ag, and Pd from waste PCBs. The effect of SCWO on the leaching of Au, Ag, and Pd in waste PCBs was studied. SCWO was highly efficient for enhancing the leaching of Au, Ag, and Pd. The optimum leaching parameters for Au, Ag, and Pd in iodine–iodide were studied. Abstract: Precious metals are the most attractive resources in waste printed circuit boards (PCBs) of mobile phones. In this work, an alternative process for recovering Au, Ag, and Pd from waste PCBs of mobile phones by supercritical water oxidation (SCWO) pre-treatment combined with iodine–iodide leaching process was developed. In the process, the waste PCBs of mobile phones were pre-treated in supercritical water, then a diluted hydrochloric acid leaching (HL) process was used to recovery the Cu, whose leaching efficiency was approximately 100%, finally the resulting residue was subjected to the iodine–iodide leaching process for recovering the Au, Ag, and Pd. Experimental results indicated that SCWO pre-treatment temperature, time, and pressure had significant influence on the Au, Ag, and Pd leaching from (SCWO + HL)-treated waste PCBs. The optimal SCWO pre-treatment conditions were 420 °C and 60 min for Au and Pd, and 410 °C and 30 min for Ag. The optimum dissolution parameters for Au, Pd, and Ag in (SCWO + HL)-treated PCBs with iodine–iodide system were leaching time of 120 min (90 min for Ag), iodine/iodide mole ratio of 1:5 (1:6 for Ag), solid-to-liquid ratio (S/L) of 1:10 g/mL (1:8 g/mL for Ag), and pH of 9, respectively. It is believed that the process developed in this study is environment friendly for the recovery of Au, Ag, and Pd from waste PCBs of mobile phones by SCWO pre-treatment combined with iodine–iodide leaching process.