Lateral buckling behavior and strengthening techniques of coped steel I-beams. (May 2015)

• Record Type: Journal Article
• Authors: Ibrahim, Sherif A.; Dessouki, Abdelrahim K.; El -Sa'eed, Seham A.
• Is Part Of: Journal of constructional steel research. Volume 108(2015:May)
• Page Start: 11
• Page End: 22
• Publication Date: 2015-05
• Subjects: Lateral torsional buckling -- Coped I-beams -- Finite element -- Local buckling -- Strengthening; Steel, Structural -- Periodicals; Building, Iron and steel -- Periodicals; Acier de construction -- Périodiques; Construction métallique -- Périodiques; 624.1821
• DOI: 10.1016/j.jcsr.2015.02.003
• Languages: English
• ISSNs: 0143-974X

Abstract

Abstract: An experimental study of the inelastic lateral torsional buckling of coped beams with simply supported ends is presented in this paper. Six full scale coped steel I-beam tests were conducted. The test parameters include the aspect ratio of cope length to beam depth at coped region as well as the ratio of cope depth to beam depth. The results of experimental tests were compared with finite element model results. The test results showed that a reduction in the inelastic buckling load due to coping could reach more than 60% of the uncoped buckling capacity. A group of twelve finite element models for steel coped beams is investigated. A comparison between uncoped models and coped models with different geometrical parameters is performed. The finite element results showed that both the cope length and cope depth have a significant influence on the lateral torsional buckling capacity. A parametric study of coped beams with stiffeners at coped region is reported in this paper. Based on the results of coped beams strengthened with either horizontal or vertical stiffeners, it is found that for cope depth to beam depth (dc /D) ≥ 0.25; both horizontal and vertical stiffeners are required to prevent local web buckling at the coped region. Highlights: A study of the inelastic lateral torsional buckling of coped beams is presented. The test parameters include the cope length as well as cope depth to beam depth. Reduction in the inelastic buckling load due to coping could reach more than 60% of the uncoped buckling capacity. Different strengthening techniques using horizontal and/or vertical stiffeners are used for the coped region.