Assessment of stress distribution in ankle joint: simultaneous application of experimental and finite element methods. (1st January 2015)

• Record Type: Journal Article
• Authors: Chitsazan, Ahmad; Rouhi, Gholamreza; Abbasi, Mostafa; Pezeshki, Saeid; Tavakoli, Seyed Amir Hossein
• Is Part Of: International journal of experimental and computational biomechanics. Volume 3:Number 1(2015)
• Page Start: 45
• Page End: 61
• Publication Date: 2015-01-01
• Subjects: ankle joint -- strain gauge -- experimental and computational -- stress distribution -- finite element analysis -- contact stress; Human mechanics -- Periodicals; Biomechanics -- Computer simulation -- Periodicals; Biomechanics -- Methodology -- Periodicals; 612.76
• DOI: 10.1504/IJECB.2015.067681
• Languages: English
• ISSNs: 1755-8735

Abstract

The goal of this study was to determine stress distribution in ankle joint by correlating with the strain distribution and its trend around tibia adjacent to the joint. Using an in-house device, an ankle from a cadaver was kept stable and loaded in various positions: neutral, dorsiflexion, plantar flexion, inversion and eversion. A total of six strain gauges were mounted around the shaft of the tibia, near the tibiotalar joint. This arrangement allowed us to measure deformations in the shaft of tibia. Patient-specific ankle joint geometry was generated from computed tomography data. The finite element model (FEM) of the ankle was validated using the experimental data logged by the strain gauges, and used for obtaining stress on the joint surface. A strong correlation was observed between the FEM and experimentally measured strains in magnitude (R = 0.94, P = 0.008), consequently stress distribution over the joint surface was obtained.