Load sharing in single-lap bonded/bolted composite joints. Part II: Global sensitivity analysis. (1st October 2015)

• Record Type: Journal Article
• Authors: Bodjona, Kobyé; Lessard, Larry
• Is Part Of: Composite structures. Volume 129(2015)
• Page Start: 276
• Page End: 283
• Publication Date: 2015-10-01
• Subjects: Lap joint -- Bolt -- Bond -- Hybrid -- Composite; Composite construction -- Periodicals; Composites -- Périodiques; 624.18
• DOI: 10.1016/j.compstruct.2015.03.069
• Languages: English
• ISSNs: 0263-8223

Abstract

Abstract: Bonded/bolted joints in composites are potentially stronger and more durable than the underlying bonded and bolted joints separately. While recent experimental work has revealed that the most significant "across-the-board" improvements (compared to both constituent joints) are obtained when there is substantial load sharing between the adhesive and bolts, there is currently limited understanding of how load sharing works and how it can most effectively be achieved. In order to answer this question, this work presents an extensive global sensitivity analysis of a computational model of a single-bolt, single-lap composite joint containing an elastic–plastic adhesive. This model was previously developed and validated in part I of the paper. The objective of the sensitivity analysis was to quantify the relative importance of the different joint design parameters (factors) in load sharing. It was determined that adhesive yield strength is singularly the most important factor, by between 2 and 9 times depending on the level of load applied to the joint. The joint E / D ratio, adhesive hardening slope and adhesive thickness were found to be other significant factors influencing load sharing. For designs in which the adhesive overlap did not fully plasticise, no significant proportion (⩽10%) of the applied load was found to be transferred to the bolt.