Enhancing oil removal from water by immobilizing multi-wall carbon nanotubes on the surface of polyurethane foam. (1st July 2015)

• Record Type: Journal Article
• Authors: Keshavarz, Alireza; Zilouei, Hamid; Abdolmaleki, Amir; Asadinezhad, Ahmad
• Is Part Of: Journal of environmental management. Volume 157(2015)
• Page Start: 279
• Page End: 286
• Publication Date: 2015-07-01
• Subjects: Oil removal -- Polyurethane foam -- Multi-walled carbon nanotube -- Surface modification; Environmental policy -- Periodicals; Environmental management -- Periodicals; Environment -- Periodicals; Ecology -- Periodicals; 363.705
• DOI: 10.1016/j.jenvman.2015.04.030
• Languages: English
• ISSNs: 0301-4797

Abstract

Abstract: A surface modification method was carried out to enhance the light crude oil sorption capacity of polyurethane foam (PUF) through immobilization of multi-walled carbon nanotube (MWCNT) on the foam surface at various concentrations. The developed sorbent was characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis, and tensile elongation test. The results obtained from thermogravimetric and tensile elongation tests showed the improvement of thermal and mechanical resistance of surface-modified foam. The experimental data also revealed that the immobilization of MWCNT on PUF surface enhanced the sorption capacity of light crude oil and reduced water sorption. The highest oil removal capacity was obtained for 1 wt% MWCNT on PUF surface which was 21.44% enhancement in light crude oil sorption compared to the blank PUF. The reusability of surface modified PUF was determined through four cycles of chemical regeneration using petroleum ether. The adsorption of light crude oil with 30 g initial mass showed that 85.45% of the initial oil sorption capacity of this modified sorbent was remained after four regeneration cycles. Equilibrium isotherms for adsorption of oil were analyzed by the Freundlich, Langmuir, Temkin, and Redlich–Peterson models through linear and non-linear regression methods. Results of equilibrium revealed that Langmuir isotherm is the best fitting model and non-linear method is a more accurate way to predict the parameters involved in the isotherms. The overall findings suggested the promising potentials of the developed sorbent in order to be efficiently used in large-scale oil spill cleanup. Highlights: Multiwall carbon nanotubes were immobilized on the surface of polyurethane foam. Thermal and mechanical strengths of the polyurethane foam were improved. Oil adsorption capacity was increased up to 22% over the blank polyurethane foam. Reusability feature of the sorbents was investigated via 4-cycles regeneration.