Effects of Grain Refinement by ECAP on the Deformation Resistance of Al Interpreted in Terms of Boundary-Mediated Processes. Issue 12 (December 2016)

• Record Type: Journal Article
• Authors: Blum, W.; Dvořák, J.; Král, P.; Eisenlohr, P.; Sklenička, V.
• Is Part Of: Journal of materials science & technology. Volume 32:Issue 12(2016:Dec.)
• Page Start: 1309
• Page End: 1320
• Publication Date: 2016-12
• Subjects: Deformation -- Grain boundaries -- Equal channel angular pressing (ECAP) -- Creep -- Dynamic recovery -- Fine grained microstructure; Metals -- Periodicals; Materials science -- Periodicals; Materials science; Metals; Periodicals; 620.1105
• DOI: 10.1016/j.jmst.2016.08.028
• Languages: English
• ISSNs: 1005-0302

Abstract

Abstract : Results of a large set of tensile and compressive creep tests on pure Al were reanalyzed for the influence of low- and high-angle grain boundaries on the deformation resistance at the temperature T = 473 K = 0.51 T m where T m is the melting point. Thermomechanical treatment by equal channel angular pressing followed by heating to T led to strong increase of areal fraction of high-angle boundaries in a structure of subgrains of ≈10 −6 m in size, accompanied by significant reduction of subgrain strengthening and of the stress sensitivity of the deformation rate. (Sub)grain strengthening by low-angle boundaries is most effective; the strengthening effect virtually disappears during creep as the boundary spacings coarsen toward their stress-dependent, quasi-stationary size w qs . The same type of coarsening is found for (sub)grain structures with large fraction of high-angle boundaries; in the quasi-stationary state they lead to softening at low and strengthening at high stresses, and a significant increase in tensile fracture strain to values up to 0.8. The results are analogous to former results for Cu and are explained in the same way by the influence of boundaries on storage and recovery of crystal defects and the homogenization of glide.