Effect of additional holes on transient thermal fatigue life of gas turbine casing. (October 2017)

• Record Type: Journal Article
• Authors: Bazvandi, H.
• Is Part Of: Case studies in engineering failure analysis. Volume 9(2017)
• Page Start: 78
• Page End: 86
• Publication Date: 2017-10
• Subjects: Gas turbine casing -- Additional holes -- Transient thermal fatigue crack propagation life -- Residual stress; System failures (Engineering) -- Case studies -- Periodicals; Fracture mechanics -- Case studies -- Periodicals; Fracture mechanics; Reliability (Engineering); System failures (Engineering); Electronic journals -- Sciences; Case studies; Periodicals; 620.0045205
• DOI: 10.1016/j.csefa.2017.07.002
• Languages: English
• ISSNs: 2213-2902

Abstract

Highlights: The transient thermal fatigue life of a gas turbine casing is investigated. Residual stress induced by insertion of pin is investigated. The arrangement of additional holes is discussed. The fatigue crack propagation life of a gas turbine casing is investigated. Abstract: Gas turbines casings are susceptible to cracking at the edge of eccentric pin hole, which is the most likely position for crack initiation and propagation. This paper describes the improvement of transient thermal fatigue crack propagation life of gas turbines casings through the application of additional holes. The crack position and direction was determined using non-destructive tests. A series of finite element patterns were developed and tested in ASTM-A395 elastic perfectly-plastic ductile cast iron. The effect of arrangement of additional holes on transient thermal fatigue behavior of gas turbines casings containing hole edge cracks was investigated. ABAQUS finite element package and Zencrack fracture mechanics code were used for modeling. The effect of the reduction of transient thermal stress distribution around the eccentric pin hole on the transient thermal fatigue crack propagation life of the gas turbines casings was discussed. The result shows that transient thermal fatigue crack propagation life could be extended by applying additional holes of larger diameter and decreased by increasing the vertical distance, angle, and distance between the eccentric pin hole and the additional holes. The results from the numerical predictions were compared with experimental data.