The effect of round corner on lubrication of high speed cylindrical roller bearings considering skidding. Issue 6 (13th November 2017)

• Record Type: Journal Article
• Authors: Cao, Wei; Wang, Jiaxu; Pu, Wei; Zhang, Ying; Wu, Jiqiang; Ren, Si; Long, Jianbing
• Is Part Of: Industrial lubrication and tribology. Volume 69:Issue 6(2017)
• Page Start: 833
• Page End: 843
• Publication Date: 2017-11-13
• Subjects: Cylindrical roller bearing -- Mixed elastohydrodynamic lubrication -- Round corner -- Skidding; Lubrication and lubricants -- Periodicals; Tribology -- Periodicals; 621.89
• DOI: 10.1108/ILT-03-2016-0055
• Languages: English
• ISSNs: 0036-8792

Abstract

Abstract : Purpose: Previous studies were mainly focused on profile designation of bearing rollers and lubrication performance without considering roller-races skidding. However, the width of round corner, load, rotational speed and some other parameters have significant effects on the roller-races sliding speed. This paper aims to investigate the effect of round corner on lubricating characteristics between the heavily loaded roller and inner race considering skidding and roughness. Design/methodology/approach: A mixed elastohydrodynamic lubrication (EHL) model which is capable of handling practical cases with 3D machined roughness is combined with the skidding model to investigate the effect of round corner on lubricating characteristics between the heavily loaded roller and inner race. Findings: The width of round corner and round corner radius have a desirable range under certain operating condition, within which the maximum pressure, stress and maximum flash temperature remain low. The optimized range is sensitive to the operating condition. Roughness and skidding narrow the optimized range of round corner radius. Roughness increases the pressure peak, Mises stress and friction coefficient. At the same time, skidding and roughness have obvious effects on film thickness at the contact center area if the round radius is small. Research limitations/implications: This paper uses the Harris skidding model that has a relatively bigger error, which is not accurate if the bearing load is less. Practical implications: This paper unifies the skidding model and mixed EHL model which can be used as a tool for optimization design and lubricating performance analysis of cylindrical roller bearing. Originality/value: Lubrication analyses for roller bearing are assumed to be pure rolling contact between roller and races in a previous study, which could not reflect the real contact characteristics. The skidding model is merged into a mixed EHL model which can be used as a dynamic tool to analyze the lubricating performance considering the round corner, skidding and roughness.