Effects of particle size and dispersion methods of In2O3‐SnO2 mixed powders on the sintering properties of indium tin oxide ceramics. Issue 1 (29th August 2017)

• Record Type: Journal Article
• Authors: Mei, Fangsheng; Yuan, Tiechui; Li, Ruidi; Zhou, Libo; Qin, Kai
• Is Part Of: International journal of applied ceramic technology. Volume 15:Issue 1(2018)
• Page Start: 89
• Page End: 100
• Publication Date: 2017-08-29
• Subjects: agglomerates -- densification -- particle size -- relative grain size; Ceramics -- Periodicals; Ceramics -- Technological innovations -- Periodicals; 620.1405
• DOI: 10.1111/ijac.12790
• Languages: English
• ISSNs: 1546-542X

Abstract

Abstract: Three group samples were used to investigate the effects of particle size and dispersion methods of In2 O3 ‐SnO2 mixed powders on the sintering properties of ITO ceramics by BET, SEM, XRD, and EPMA, etc. High‐density (99.8% of TD) ITO ceramics, with dimensions of 350 × 250 × 8 mm 3 for the industrial application, were obtained by the mixed powders of In2 O3 calcined at 1000°C and SnO2 with BET 6.0 ± 0.5 m 2 /g and collocation use of ball mill for 300 minutes, stirred mill for 60 minutes, and sand mill for 3 minutes. The results indicate that: (i) the larger the SnO2 /In2 O3 particle size ratio, the higher the density of ITO ceramics, (ii) the dispersion of mechanical ball‐mill methods for nanosized In2 O3 and SnO2 powders is beneficial to the densification and structural homogeneity, and (iii) the smaller the relative grain size, the more uniform the distribution of grain size.