Adsorbed Eutectic GaIn Structures on a Neoprene Foam for Stretchable MRI Coils. Issue 44 (13th October 2017)

• Record Type: Journal Article
• Authors: Varga, Matija; Mehmann, Andreas; Marjanovic, Josip; Reber, Jonas; Vogt, Christian; Pruessmann, Klaas Paul; Tröster, Gerhard
• Is Part Of: Advanced materials. Volume 29:Issue 44(2017)
• Page Start: n/a
• Page End: n/a
• Publication Date: 2017-10-13
• Subjects: eutectic gallium indium materials -- stretchable conductors -- stretchable electronics -- wearable magnetic resonance imaging coils; Materials -- Periodicals; Chemical vapor deposition -- Periodicals; 620.11
• DOI: 10.1002/adma.201703744
• Languages: English
• ISSNs: 0935-9648

Abstract

Abstract: Stretchable conductors based on eutectic gallium–indium (eGaIn) alloy are patterned on a polychloroprene substrate (neoprene foam) using stencil printing. By tuning the amount of eGaIn on the neoprene substrate, different strain‐sensitivity of electrical resistance is achieved. Conductors with a layer of eGaIn, which adsorbs to the walls of 60–100 µm wide neoprene cells, change their electrical resistance for 5% at 100% strain. When the amount of eGaIn is increased, the cells are filled with eGaIn and the strain‐sensitivity of the electrical resistance rises to 300% at 100% strain. The developed conductors are patterned as stretchable on‐body coils for receiving magnetic signals in a clinical magnetic resonance imaging setup. First images with a stretchable coil are acquired on an orange and compared to the images that are recorded using a rigid copper coil of the same size. Abstract : Stretchable conductors based on eutectic gallium–indium (eGaIn) alloy are fabricated on a substrate with a microstructured surface (neoprene foam). By varying the amount of the eGaIn alloy during stencil‐printing, the strain sensitivity of the electrical resistance is tuned from 5% to 300% at 100% strain. The developed conductors are used to fabricate stretchable on‐body coils for magnetic resonance imaging.