Shear Transfer Capacity of Composite Sections in Steel Tubed-Reinforced-Concrete Frames. (November 2017)

• Record Type: Journal Article
• Authors: Gan, Dan; Zhou, Zheng; Yan, Feng; Zhou, Xuhong
• Is Part Of: Structures. Volume 12(2017)
• Page Start: 54
• Page End: 63
• Publication Date: 2017-11
• Subjects: Concrete filled steel tube -- Steel tubed-reinforced-concrete -- Tube opening -- Diagonal shear failure -- Shear transfer capacity -- Through-beam joint -- Composite joint; Structural engineering -- Periodicals; 624.1
• DOI: 10.1016/j.istruc.2017.08.001
• Languages: English
• ISSNs: 2352-0124

Abstract

Abstract: The tubed-reinforced-concrete (TRC) column is a particular type of concrete-filled steel tube (CFST) column, in which the encasing thin-walled steel tube is discontinuous in order to avoid the direct transfer of an axial load and to maximize the confinement effect from the steel tube. Five partially through RC beam-TRC column joints with rectangular openings on the tube were tested under monotonic load to investigate the failure mode and shear transfer capacity of the interface between the column and the beam (Section a-a). The primary parameters considered in the tests were the 1) shear span-depth ratio ( λ = 0.5, 1.5) of the beam; 2) opening ratio (depth of openings to depth of the RC beam ξ = 0.5, 0.67); 3) welded re-bar on the tube in the joint zone. By comparing the predicted shear transfer capacities from four different design methods with test results from the TRC columns failing in diagonal shear in the literature, a method based on the shear strength components model is selected to calculate the shear transfer capacity of the composite section where the encasing steel tube is discontinuous (Section b-b). Based on the design method of Section b-b, experiment results and theoretical analyses, a revised shear strength components model is proposed. Moreover, a unified design formula, which could consider the effects of the opening ratios and the welded re-bars, is proposed in order to predict the shear transfer capacity of both Section a-a and Section b-b.