Influence of defects induced by chemical treatment on the electrical and thermal conductivity of nanofluids containing carboxyl-functionalized multi-walled carbon nanotubes. Issue 79 (26th October 2017)

• Record Type: Journal Article
• Authors: Van Trinh, Pham; Anh, Nguyen Ngoc; Tam, Nguyen Trong; Hong, Nguyen Tuan; Hong, Phan Ngoc; Minh, Phan Ngoc; Thang, Bui Hung
• Is Part Of: RSC advances. Volume 7:Issue 79(2017)
• Page Start: 49937
• Page End: 49946
• Publication Date: 2017-10-26
• Subjects: Chemistry -- Periodicals; 540.5
• DOI: 10.1039/c7ra08552d
• Languages: English
• ISSNs: 2046-2069

Abstract

Abstract : Influence of defects induced by chemical treatment on the electrical and thermal conductivity of nanofluids containing MWCNT–COOH was investigated and presented. Abstract : In this paper, we present the results on the influence of chemical treatment time on the structure of carboxyl-functionalized MWCNTs (MWCNT–COOH) and their nanofluids. The morphological and structural studies investigated by FTIR, HRTEM and Raman scattering demonstrated that the structural defects of MWCNT–COOH increase with increasing chemical treatment time. Nanofluids containing MWCNT–COOH treated for a longer time showed better stability due to the increasing of COOH functional groups attached to the surface of MWCNTs. The electrical conductivity of the nanofluids increases with increasing CNT concentration and decreases with increasing chemical treatment time. The thermal conductivity of the nanofluids enhanced when increasing CNT concentration and reached the highest value for MWCNT–COOH with 5 h chemical treatment. By using the effective medium theory (EMT) and experimental data fitting, the thermal boundary resistance (TBR) and the thermal boundary conductance (TBC) of MWCNT–COOH/water were found to be 90 × 10 −8 m 2 K W −1 and 1.1 MW m −2 K −1, respectively. The interfacial layer thermal conductivity ( K i ) between CNTs and base fluid was estimated by using Murshed's model. The highest K i was obtained to be 2.6 W m −1 K −1 for a nanofluid with 5 h chemical treatment. The results implied that the thermal conductivity of CNT based nanofluids could be improved by increasing the K i via optimizing of the chemical treatment conditions.