The effect of particle size on the heat affected zone during laser cladding of Ni–Cr–Si–B alloy on C45 carbon steel. (February 2018)

• Record Type: Journal Article
• Authors: Tanigawa, Daichi; Abe, Nobuyuki; Tsukamoto, Masahiro; Hayashi, Yoshihiko; Yamazaki, Hiroyuki; Tatsumi, Yoshihiro; Yoneyama, Mikio
• Is Part Of: Optics and lasers in engineering. Volume 101(2018)
• Page Start: 23
• Page End: 27
• Publication Date: 2018-02
• Subjects: Laser cladding -- Diode laser -- Heat affected zone -- Heat input -- Particle size; Lasers in engineering -- Periodicals; Optical measurements -- Periodicals; Optics -- Periodicals; Lasers en ingénierie -- Périodiques; Mesures optiques -- Périodiques; Optique -- Périodiques; 621.36605
• DOI: 10.1016/j.optlaseng.2017.09.021
• Languages: English
• ISSNs: 0143-8166

Abstract

Highlights: Ni–Cr–Si–B alloy coating was produced on C45 carbon steel plate with diode laser. Dependence of particle size on heat input was investigated. Heat input and heat affected zone was decreased as smaller particles were used. Abstract: Laser cladding is one of the most useful surface coating methods for improving the wear and corrosion resistance of material surfaces. Although the heat input associated with laser cladding is small, a heat affected zone (HAZ) is still generated within the substrate because this is a thermal process. In order to reduce the area of the HAZ, the heat input must therefore be reduced. In the present study, we examined the effects of the powdered raw material particle size on the heat input and the extent of the HAZ during powder bed laser cladding. Ni–Cr–Si–B alloy layers were produced on C45 carbon steel substrates in conjunction with alloy powders having average particle sizes of 30, 40 and 55 µm, while measuring the HAZ area by optical microscopy. The heat input required for layer formation was found to decrease as smaller particles were used, such that the HAZ area was also reduced.