Foamed high porosity alumina for use as a bone tissue scaffold. Issue 1 (January 2015)

• Record Type: Journal Article
• Authors: Soh, Edwin; Kolos, Elizabeth; Ruys, Andrew J.
• Is Part Of: Ceramics international. Volume 41:Issue 1(2015)Part B
• Page Start: 1031
• Page End: 1047
• Publication Date: 2015-01
• Subjects: A. Powders:chemical preparation -- B. Porosity -- D. Al2O3 -- E. Biomedical applications; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2014.09.026
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: Porous alumina can be used as a synthetic bone scaffold in tissue engineering. Using a direct foaming method a foamed alumina was produced using in situ evolution of gases by calcining blends of ammonium sulphate and aluminium sulphate with varying ammonium mole fraction (AMF). The effect of foaming heating rate was observed by varying the foaming heating rate from 100 °C/h to 600 °C/h. The effect of sintering temperature was also observed by varying the sintering temperature from 1500 °C to 1600 °C. The resulting porous structure exhibited high mechanical strength with high levels of porosity and high average pore size. Foamed alumina with the optimal conditions was fabricated using 0.33 AMF with a foaming heating rate of 100 °C/h followed by sintering at 1600 °C. The porous alumina produced attained a high porosity value of 94.39%, an average pore size of 300 µm and the highest strength amongst all samples of 384.3 kPa. Interconnected porosity was observed using micro-CT.