Comparison of low and atmospheric pressure air plasma treatment of polyethylene. (April 2013)

• Record Type: Journal Article
• Authors: Kikani, P; Desai, B; Prajapati, S; Arun, P; Chauhan, N; Nema, S K
• Is Part Of: Surface engineering. Volume 29:Number 3(2013)
• Page Start: 211
• Page End: 221
• Publication Date: 2013-04
• Subjects: Polyethylene -- 13·56 MHz -- 40 kHz -- DBD -- Activation -- Aging; Surfaces (Technology) -- Periodicals; Coatings -- Periodicals; 620.4405
• DOI: 10.1179/1743294413Y.0000000111
• Languages: English
• ISSNs: 0267-0844

Abstract

Abstract : Surface activation of polyethylene (PE) samples has been carried out using low pressure plasmas (at two different operating frequencies, namely, 40 kHz and 13·56 MHz) and dielectric barrier discharge (DBD) (50 Hz frequency and at atmospheric pressure), and the results are compared. The surface of the PE samples has been exposed to these different plasmas for various time durations ranging from 1 to 30 min. The treated samples have also been studied for their aging behaviour by exposing them to the ambient atmosphere for up to 7 days. The plasma induced morphological changes were studied using an scanning electron microscope and an atomic force microscope, while the formation of various functional groups was identified using Fourier transform infrared analysis. The surface energy values were observed to increase from 27·5 dyne cm −1 (of untreated PE) to 73·8 and 52·2 dyne cm −1 after low pressure 40 kHz and 13·56 MHz air plasma treatment respectively and to 35·6 dyne cm −1 after the DBD air plasma treatment. The low pressure plasma treatment at an operating frequency of 40 kHz has produced the best results in the surface activation of PE. During the aging process, the formation of C = C bonds was observed on the surface of PE.