Effect of Angle between the Primary and Auxiliary Holes of an Anti-vortex Film Cooling Hole. (2015)

• Record Type: Journal Article
• Authors: Moon, Younggi; Park, Soon Sang; Park, Jung Shin; Kwak, Jae Su
• Is Part Of: Procedia engineering. Volume 99(2015)
• Page Start: 1492
• Page End: 1496
• Publication Date: 2015
• Subjects: Film cooling -- Anti-vortex film cooling -- CFD; Engineering -- Congresses; Engineering -- Periodicals; Engineering; Conference proceedings; Periodicals; 620.005
• DOI: 10.1016/j.proeng.2014.12.690
• Languages: English
• ISSNs: 1877-7058

Abstract

Abstract: In this paper, weanalytically investigated the effect of the angle between primary and auxiliary film cooling holes of an anti-vortex hole on the film cooling effectiveness. The effect of blowing ratio and the mainstream turbulence intensity were also considered. A commercial software, CFX was utilized and the RNG k-ɛ turbulence model was selected as the turbulence model for the analysis. The angle between primary and auxiliary hole was varied from 0 to 75 degrees and the blowing ratio was ranged from 0.25 to 2.0. Four different mainstream turbulence intensities were also considered. Results showed that the anti-vortex film cooling holes performed better than the cylindrical hole. Also, the film cooling effectiveness for the anti-vortex holes were strongly affected by the angle between primary and auxiliary holes of the anti-vortex film cooling hole and the mainstream turbulence intensity.