Ballistic limit equations for non-aluminum projectiles impacting dual-wall spacecraft systems. (2017)

• Record Type: Journal Article
• Authors: Schonberg, William P.; Ratliff, J. Martin
• Is Part Of: Procedia engineering. Volume 204(2017)
• Page Start: 516
• Page End: 521
• Publication Date: 2017
• Subjects: ballistic limit equation -- non-aluminum projectiles -- dual-wall structure -- orbital debris -- risk assessment; Engineering -- Congresses; Engineering -- Periodicals; Engineering; Conference proceedings; Periodicals; 620.005
• DOI: 10.1016/j.proeng.2017.09.750
• Languages: English
• ISSNs: 1877-7058

Abstract

Abstract: One of the primary design considerations of earth-orbiting spacecraft is the mitigation of the damage that might occur from an on-orbit MMOD impact. Traditional damage-resistant design consists of a 'bumper' that is placed a small distance away from a spacecraft component or from the wall of the element in which it is housed. The performance of such a multi-wall structural element is typically characterized by its ballistic limit equation (BLE), which defines the threshold particle size that results in a failure of the spacecraft element. BLEs are also key components of any micro-meteoroid/orbital debris (MMOD) risk assessment calculations. However, these assessments often call for BLEs to predict impact response for projectiles made of materials not used in the development of those BLEs. The question naturally arises regarding how close are the predictions of such BLEs when used in impact scenarios involving projectiles made of materials not necessarily considered in their development. In an effort to address this issue, a study was performed with the objective of assessing the validity of the NNO BLE for non-aluminum particles. Particle materials considered included steel, copper, and Al2 O3 (i.e. particles that are made of materials that are more dense than aluminum). Comparisons are made between actual test results involving these non-aluminum projectiles and the predictions of the NNO BLE. In nearly all cases, the NNO BLE was found not to work very well in the predicting failure / no failure response of these non-aluminum projectiles. A new NNO-type BLE is then developed that can be used to more reliably predict the response of dual-wall systems under the hypervelocity impact of such "heavier" non-aluminum projectiles.