Experimental comparison of two heat exchanger concepts for latent heat storage applications. (October 2017)

• Record Type: Journal Article
• Authors: Frazzica, Andrea; Palomba, Valeria; Rosa, Davide La; Brancato, Vincenza
• Is Part Of: Energy procedia. Volume 135(2017)
• Page Start: 183
• Page End: 192
• Publication Date: 2017-10
• Subjects: PCMs -- latent heat storage -- experimental -- storage design; Power resources -- Congresses; Power resources -- Periodicals; Power resources; Conference proceedings; Periodicals; 333.7905
• DOI: 10.1016/j.egypro.2017.09.501
• Languages: English
• ISSNs: 1876-6102

Abstract

Abstract: In the present work, two different types of heat exchangers are experimentally compared, namely a fin-and-tubes custom made HEX and a commercial asymmetric plate heat exchanger, for the application with phase change materials. In particular, the two devices were tested in a specifically designed testing rig located at CNR-ITAE and suitable for the characterization of thermal energy storages. The testing bench allows simulating a heat source up to 100°C (e.g. solar thermal collectors, low-grade waste heat) and to set the desired discharge temperature in the range 20°C-80°C. The phase change material with which the exchangers were filled, is a commercial paraffin (Plus ICE A82), having a nominal melting temperature of 82°C. The experimental results on charge and discharge tests, realized with the same protocol, were used for a comparison of the systems, through the identification of suitable performance figures and Key Performance Indicators, such as material-to-metal ratio, heat storage density, maximum and average power achievable and effectiveness of the system. The results show that, for the tested material, characterised by a very low thermal conductivity (i.e. about 0.2 W/mK), the selected plate heat exchanger allows a better exploitation of the heat stored inside the material, letting at the same time to reach a power output in the range 1-10 kW.