A Small Power Recovery Expander for Heat Pump COP Improvement. (December 2015) - Ferrara, G.
Abstract: Heat pumps are becoming more and more applied for heating, due to their possibility of working as cooling systems in the summer period. However, up to now, recovery of expansion work in small system has not been considered as a viable solution, because of the limited amount of recoverable energy and of difficulties in designing and operating a two-phase flow expander. The idea here presented is to investigate the application of a radial piston machine, adapted from oleodynamic motor designs, as an expander that will be coupled with the compressor motor shaft; the consequent power reduction goes directly to COP improvement. First, heat pumps working conditions (pressures, mass and volume flows) are defined, and the possible power recovery is calculated. Then, a model for the performance calculation of the radial piston motors used as expander is presented; the model considers the kinematics of the mechanical system and uses real fluid properties. The results indicate that such a machine could be developed from existing units with limited modifications, encourage to develop a test rig, and to run preliminary experimental work in order to measure the real performance.