Effect of cell configuration on the compositional homogeneity of electrodeposited Cu-Zn-Sn alloys and phase purity of the resulting Cu2ZnSnS4 absorber layers. (20th November 2017)

• Record Type: Journal Article
• Authors: Unveroglu, Begum; Zangari, Giovanni
• Is Part Of: Electrochimica acta. Volume 255(2017)
• Page Start: 347
• Page End: 357
• Publication Date: 2017-11-20
• Subjects: Kesterite -- CZTS -- electrodeposition -- phase purity -- ordered type kesterite; Electrochemistry -- Periodicals; Electrochemistry, Industrial -- Periodicals; 541.37
• DOI: 10.1016/j.electacta.2017.08.155
• Languages: English
• ISSNs: 0013-4686

Abstract

Highlights: Cu-Zn-Sn films of ∼1 cm 2 area with less than 0.7 at% deviation are obtained by electroplating in a horizontal configuration. After annealing in sulfur atmosphere, phase purity and photoresponse of the CZTS layer is improved when starting with more homogenous precursors. Order of CZTS layers at the Cu-Zn sublattice is improved after annealing at 175 °C Abstract: Cu2 ZnSnS4 (CZTS) absorber layers were synthesized by electrodeposition of Cu-Zn-Sn (CZT) alloys using horizontally or vertically oriented electrodes, followed by sulfurization. A significant improvement in compositional homogeneity was observed for the horizontal vs. vertical deposition configuration, most probably due to the absence of buoyancy-induced convection and the improved uniformity of the current distribution in the former. The morphology of the two CZT films is similar, but the films grown from the horizontal, facing down electrode, show some pinholes related to the adhesion of hydrogen bubbles. The horizontally grown and sulfurized CZTS films show also a better homogeneity and improved phase purity, as demonstrated by EDS mapping and imaging. The disorder due to anti-site defects in as-sulfurized CZTS films is decreased by gentle annealing, which also results in improved crystallinity. Liquid junctions were utilized to measure film photoactivity, showing that the horizontally grown films exhibit twice as much the photocurrent from the vertically grown ones; the dark current however was higher in the former, probably owed to the presence of pinholes that provide a short circuit between the electrolyte and substrate.