Multi-objective optimization of the combustion of a heavy-duty diesel engine with low temperature combustion (LTC) under a wide load range: (II) Detailed parametric, energy, and exergy analysis. (15th November 2017)

• Record Type: Journal Article
• Authors: Xu, Guangfu; Jia, Ming; Li, Yaopeng; Xie, Maozhao; Su, Wanhua
• Is Part Of: Energy. Volume 139(2017)
• Page Start: 247
• Page End: 261
• Publication Date: 2017-11-15
• Subjects: Late intake valve closing (LIVC) -- Load range -- Emissions -- Thermal efficiency -- Exergy analysis; Power resources -- Periodicals; Power (Mechanics) -- Periodicals; Energy consumption -- Periodicals; 333.7905
• DOI: 10.1016/j.energy.2017.08.001
• Languages: English
• ISSNs: 0360-5442

Abstract

Abstract: By using a multi-dimensional computational fluid dynamics (CFD) code, the combustion process of a heavy-duty diesel engine with low temperature combustion (LTC) at different loads was investigated. Based on the optimization results, the potential of the late intake valve closing (LIVC) strategy coupled with boosted intake pressure, as well as the influence of fuel injection timing and exhaust gas recirculation (EGR) rate on the fuel consumption and emissions was discussed. The energy and exergy analyses were further performed using the first and second law of thermodynamics. The results indicate that when the LIVC strategy is applied, boosted intake pressure is needed to improve the thermal efficiency and reduce the soot emissions, especially at high load. However, retarding IVC timing leads to increasing exergy destruction as the global equivalence ratio remains constant. The exergy destruction at mid load is the lowest owing to the highest combustion temperature. At low and mid load, with advanced fuel injection, high EGR rate is required to reduce the nitrogen oxides (NOx ) emissions. At high load, with retarded fuel injection, relatively lower EGR rate is required for reducing NOx emissions because of the retarded combustion phasing and more H2 O and CO2 contained in the exhaust gases. Highlights: Parametric study was performed on a heavy-duty LTC engine under a wide load range. Effect of LIVC coupled with the related operating parameters were investigated. The first and second law of thermodynamics were used to analyze the engine efficiency.