Solving the multifunctionality dilemma in biorefineries with a novel hybrid mass–energy allocation method. Issue 11 (29th June 2017)

• Record Type: Journal Article
• Authors: Njakou Djomo, Sylvestre; Knudsen, Marie Trydeman; Parajuli, Ranjan; Andersen, Mikael Skou; Ambye‐Jensen, Morten; Jungmeier, Gerfried; Gabrielle, Benoît; Hermansen, John Erik
• Is Part Of: Global change biology. Volume 9:Issue 11(2017)
• Page Start: 1674
• Page End: 1686
• Publication Date: 2017-06-29
• Subjects: allocation -- biochemical -- biofuels -- biomaterial -- biorefinery -- GHG emissions -- HMEN method -- life cycle assessment; Biomass energy -- Periodicals; Biomass energy -- Environmental aspects -- Periodicals; Energy crops -- Periodicals; 662.88
• DOI: 10.1111/gcbb.12461
• Languages: English
• ISSNs: 1757-1693

Abstract

Abstract: Processing biomass into multifunctional products can contribute to food, feed, and energy security while also mitigating climate change. However, biorefinery products nevertheless impact the environment, and this influence needs to be properly assessed to minimize the burden. Life cycle assessment (LCA) is often used to calculate environmental footprints of products, but distributing the burdens among the different biorefinery products is a challenge. A particular complexity arises when the outputs are a combination of energy carrying no mass, and mass carrying no energy, where neither an allocation based on mass nor on energy would be appropriate. A novel hybrid mass–energy (HMEN) allocation scheme for dealing with multifunctionality problems in biorefineries was developed and applied to five biorefinery concepts. The results were compared to results of other allocation methods in LCA. The reductions in energy use and GHG emissions from using the biorefinery's biofuels were also quantified. HMEN fairly distributed impacts among biorefinery products and did not change the order of the products in terms of the level of the pollution caused. The allocation factors for HMEN fell between mass and economic allocation factors and were comparable to energy allocation factors. Where the mass or the energy allocation failed to attribute burdens, HMEN addressed this shortcoming by assigning impacts to nonmass or to nonenergy products. Under the partitioning methods and regardless of the feedstock used, bioethanol reduced GHG by 72–98% relative to gasoline. The GHG savings were 196% under the substitution method, but no GHG savings occurred for sugar beet bioethanol under the surplus method. Bioethanol from cellulosic crops had lower energy use and GHG emissions than from sugar beet, regardless of the allocation method used. HMEN solves multifunctional problems in biorefineries and can be applied to other complex refinery systems. LCA practitioners are encouraged to further test this method in other case studies. Abstract : A new method based on physical parameters and that improves over the current mass and energy allocation is developed and tested on five biorefinery concepts. Results show the new method was able to assign environmental burdens to those products without mass or energy content, which is a major progress over classical allocation methods.