Performance prediction of PEM fuel cell with wavy serpentine flow channel by using artificial neural network. (5th October 2017)

• Record Type: Journal Article
• Authors: Seyhan, Mehmet; Akansu, Yahya Erkan; Murat, Miraç; Korkmaz, Yusuf; Akansu, Selahaddin Orhan
• Is Part Of: International journal of hydrogen energy. Volume 42:Number 40(2017)
• Page Start: 25619
• Page End: 25629
• Publication Date: 2017-10-05
• Subjects: PEM fuel cell -- Wavy shaped serpentine -- Artificial neural network; Hydrogen as fuel -- Periodicals; Hydrogène (Combustible) -- Périodiques; Hydrogen as fuel; Periodicals; 665.81
• DOI: 10.1016/j.ijhydene.2017.04.001
• Languages: English
• ISSNs: 0360-3199

Abstract

Abstract: Effects of serpentine flow channel having sinusoidal wave at the rib surface on performance of PEMFC having 25 cm 2 active area are investigated at different flow rates, three different amplitudes changing from 0.25 mm to 0.75 mm and three different cell operation temperatures. A proton exchange membrane fuel cell (PEMFC) is modeled for the prediction of the output current by using artificial neural network (ANN) that is utilized the aforementioned experimental parameters. Effect of hydrogen and air flow rate, the fuel cell temperature, amplitude of channel is tested. The results indicated that model C1 having lowest amplitude is enhanced maximum power output up to 20.15% as compared to indicated conventional serpentine channel (model C4) for 0.7 SLPM H2 and 1.5 SLPM air and also model C1 has better performance than C2, C3 and C4 models. The maximum power output is augmented with increasing the cell temperature due to raising the fuel and oxidant diffusion ratio. Cell temperature, amplitude, H2 and air flow rate and input voltage is used as input variables in train and test of the developing ANN model. MAPE of training and testing is determined as 2.89 and 2.059, respectively. Prediction results of developed ANN model including two hidden layer shows similar trend with experimental results. Developed ANN model can be used to both decrease the number of required experiments and find the optimum operation condition within the range of input parameters. Highlights: To increase PEMFC performance, wavy shaped flow channel at the rib surface is designed and tested. The channel having lowest amplitude (C1 model) has better performance than the other channels. Maximum power output of C1 is increased up to 20.15% as compared to conventional serpentine flow channel. ANN model is successfully developed showing similar trend between predicted and experimental data.