Influence of anisotropic bone properties on the biomechanical behavior of the acetabular cup implant: a multiscale finite element study. Issue 12 (10th September 2017)

• Record Type: Journal Article
• Authors: Nguyen, Vu-Hieu; Rosi, Giuseppe; Naili, Salah; Michel, Adrien; Raffa, Maria-Letizia; Bosc, Romain; Meningaud, Jean-Paul; Chappard, Christine; Takano, Naoki; Haiat, Guillaume
• Is Part Of: Computer methods in biomechanics and biomedical engineering. Volume 20:Issue 12(2017)
• Page Start: 1312
• Page End: 1325
• Publication Date: 2017-09-10
• Subjects: Acetabular cup -- total hip replacement -- finite element analysis -- bone -- homogenization; Biomechanics -- Data processing -- Periodicals; Biomedical engineering -- Periodicals; Biomechanics -- Periodicals; Biomedical Engineering -- methods -- Periodicals; Computing Methodologies -- Periodicals; 612.7
• DOI: 10.1080/10255842.2017.1357703
• Languages: English
• ISSNs: 1025-5842

Abstract

Abstract: Although the biomechanical behavior of the acetabular cup (AC) implant is determinant for the surgical success, it remains difficult to be assessed due to the multiscale and anisotropic nature of bone tissue. The aim of the present study was to investigate the influence of the anisotropic properties of peri-implant trabecular bone tissue on the biomechanical behavior of the AC implant at the macroscopic scale. Thirteen bovine trabecular bone samples were imaged using micro-computed tomography (μCT) with a resolution of 18 μm. The anisotropic biomechanical properties of each sample were determined at the scale of the centimeter based on a dedicated method using asymptotic homogenization. The material properties obtained with this multiscale approach were used as input data in a 3D finite element model to simulate the macroscopic mechanical behavior of the AC implant under different loading conditions. The largest stress and strain magnitudes were found around the equatorial rim and in the polar area of the AC implant. All macroscopic stiffness quantities were significantly correlated ( R 2 > 0.85, p < 6.5 e-6) with BV/TV (bone volume/total volume). Moreover, the maximum value of the von Mises stress field was significantly correlated with BV/TV ( R 2 > 0.61, p < 1.6 e-3) and was always found at the bone-implant interface. However, the mean value of the microscopic stress (at the scale of the trabeculae) decrease as a function of BV/TV for vertical and torsional loading and do not depend on BV/TV for horizontal loading. These results highlight the importance of the anisotropic properties of bone tissue.