Behaviour of Small Diameter Steel Tubes Under Axial Compression. (August 2017)

• Record Type: Journal Article
• Authors: Alhussainy, Faez; Sheikh, M. Neaz; Hadi, Muhammad N.S.
• Is Part Of: Structures. Volume 11(2017)
• Page Start: 155
• Page End: 163
• Publication Date: 2017-08
• Subjects: Steel tube -- Axial tension -- Axial compression -- Length to outside diameter ratio -- Stress-strain behaviour; Structural engineering -- Periodicals; 624.1
• DOI: 10.1016/j.istruc.2017.05.006
• Languages: English
• ISSNs: 2352-0124

Abstract

Abstract: Small diameter steel tubes are used in many civil engineering applications. Recently, the behaviour of concrete columns reinforced with small diameter steel tubes was experimentally and analytically investigated. This study explores the effect of unsupported length to the outside diameter ( L / D ) ratio on the axial compressive behaviour of small diameter steel tubes, which has not yet been adequately investigated. Galvanized and cold-formed steel tube specimens with L / D ratio of 2 to 12 were tested. It was observed that for specimens with L / D ratio of 2 and 4, the compressive failure occurred due to local elephant's foot buckling. However, the compressive failure mode changed to global buckling for specimens with L / D ratio ≥ 6. The ultimate compressive strength was found to be lower than the ultimate tensile strength for specimens with L / D ratio ≥ 6.