Enhanced Mechanical Properties of Friction Stir Welded 5083Al-H19 Joints with Additional Water Cooling. Issue 9 (September 2017)

• Record Type: Journal Article
• Authors: Wang, B.B.; Chen, F.F.; Liu, F.; Wang, W.G.; Xue, P.; Ma, Z.Y.
• Is Part Of: Journal of materials science & technology. Volume 33:Issue 9(2017:Sep.)
• Page Start: 1009
• Page End: 1014
• Publication Date: 2017-09
• Subjects: Friction stir welding -- Aluminum alloy -- Water cooling -- Microstructure -- Mechanical property; Metals -- Periodicals; Materials science -- Periodicals; Materials science; Metals; Periodicals; 620.1105
• DOI: 10.1016/j.jmst.2017.01.016
• Languages: English
• ISSNs: 1005-0302

Abstract

Abstract: 3-mm-thick 5083Al-H19 rolled plates were friction stir welded (FSW) at tool rotation rates of 800 and 200 rpm with and without additional water cooling. With decreasing the rotation rate and applying water cooling, softening in the FSW joint was significantly reduced. At a low rotation rate of 200 rpm with additional water cooling, almost no obvious softening was observed in the FSW joint, and therefore a FSW 5083Al-H19 joint with nearly equal strength to the base material (BM) was obtained. Furthermore, the grains in the nugget zone were considerably refined with reducing the heat input and ultrafine equiaxed grains of about 800 nm were obtained in the lowest heat input condition. This work provides an effective method to achieve high property FSW joints of precipitate-hardened and work-hardened Al alloys.