Effect of CO2-induced reactions on the mechanical behaviour of fractured wellbore cement. (September 2016)

• Record Type: Journal Article
• Authors: Wolterbeek, Timotheus K.T.; Hangx, Suzanne J.T.; Spiers, Christopher J.
• Is Part Of: Geomechanics for energy and the environment. Volume 7(2016)
• Page Start: 26
• Page End: 46
• Publication Date: 2016-09
• Subjects: CO2 storage -- Wellbore integrity -- Cement carbonation -- Mechanical properties -- Fracture healing -- Failure; Engineering geology -- Periodicals; Power resources -- Periodicals; Energy development -- Technological innovations -- Periodicals; Engineering geology -- Environmental aspects -- Periodicals; Energy development -- Technological innovations; Engineering geology; Engineering geology -- Environmental aspects; Power resources; Geology -- Periodicals; Energy-Generating Resources -- Periodicals; Periodicals; Electronic journals; 621.042
• DOI: 10.1016/j.gete.2016.02.002
• Languages: English
• ISSNs: 2352-3808

Abstract

Abstract: Geomechanical damage, such as fracturing of wellbore cement, can severely impact well integrity in CO2 storage fields. Chemical reactions between the cement and CO2 -bearing fluids may subsequently alter the cement's mechanical properties, either enhancing or inhibiting damage accumulation during ongoing changes in wellbore temperature and stress-state. To evaluate the potential for such effects, we performed triaxial compression tests on Class G Portland cement, conducted at down-hole temperature (80 °C) and effective confining pressures ranging from 1 to 25 MPa. After deformation, samples displaying failure on localised shear fractures were reacted with CO2 –H2 O, and then subjected to a second triaxial test to assess changes in mechanical properties. Using results from the first phase of deformation, baseline yield and failure criteria were constructed for virgin cement. These delineate stress conditions where unreacted cement is most prone to dilatational (permeability-enhancing) failure. Once shear-fractures formed, later reaction with CO2 did not produce further geomechanical weakening. Instead, after six weeks of batch reaction, we observed up to 83% recovery of peak-strength and increased frictional strength (15%–40%) in the post-failure regime, due to carbonate precipitation in the fractures. As such, our results suggest more or less complete mechanical healing on timescales of the order of months. Highlights: Base-line yield and failure criteria were constructed for unreacted wellbore cement. Fractured samples were subsequently reacted with CO2 -saturated water and re-tested. Reaction resulted in reappearance of a peak strength and higher frictional strength. These results suggest mechanical healing of the fractures over periods of months. This implies reaction-induced sealing is unlikely negated by mechanical weakening.