Comparative study of some machinability aspects in turning of pure titanium with untreated and cryogenically treated carbide inserts. (August 2017)

• Record Type: Journal Article
• Authors: Khan, Akhtar; Maity, Kalipada
• Is Part Of: Journal of manufacturing processes. Volume 28:Part 1(2017)
• Page Start: 272
• Page End: 284
• Publication Date: 2017-08
• Subjects: Tool wear -- Chip morphology -- Titanium grade 2 -- Chip compression ratio -- Friction coefficient; Production management -- Data processing -- Periodicals; Manufacturing processes -- Periodicals; Procestechnologie; Productietechniek; Production -- Gestion -- Informatique -- Périodiques; Fabrication -- Périodiques; Manufacturing processes; Production management -- Data processing; Periodicals; 670.5
• DOI: 10.1016/j.jmapro.2017.05.018
• Languages: English
• ISSNs: 1526-6125

Abstract

Abstract: The present paper compares some of the key machinability aspects acquired during turning of commercially pure (CP) titanium grade − 2 with untreated and cryogenically treated carbide tools in a dry cutting environment. Tool wear, friction coefficient, chip compression ratio and chip morphology were the major attentions. The workpiece material was turned according to Taguchi's L9 orthogonal array. Characterization of cutting tool insert was done using field emission scanning microscope (FESEM) coupled with energy dispersive spectroscope (EDS), X-ray diffractometer, Vickers micro hardness tester, pin-on-disc type wear resistance tester, before and after cryogenic treatment. Chip morphology was studied under FESEM while an optical microscope was utilized to measure and examine the wears on flank and rake surfaces of both the cutting inserts. Results indicated that cryo-treated tools lead to a reduced chip compression ratio and friction coefficient compared to its untreated counterpart. However, cryogenically treated insert was found to be more favourable because it demonstrated superior resistance to flank and crater wear during machining of CP-Ti grade 2.