Color Stability of CAD/CAM Fabricated Inlays after Accelerated Artificial Aging. Issue 6 (15th September 2015)

• Record Type: Journal Article
• Authors: Karaokutan, Isil; Yilmaz Savas, Tuba; Aykent, Filiz; Ozdere, Eda
• Is Part Of: Journal of prosthodontics. Volume 25:Issue 6(2016)
• Page Start: 472
• Page End: 477
• Publication Date: 2015-09-15
• Subjects: Ceramic -- inlay -- CAD/CAM -- color stability -- accelerated aging; Prosthodontics -- Periodicals; Dental implants -- Periodicals; Dentistry -- Periodicals; 617.69
• DOI: 10.1111/jopr.12353
• Languages: English
• ISSNs: 1059-941X

Abstract

Abstract: Purpose: To investigate the influence of accelerated artificial aging on the color stability of three different inlay restorations produced with a CAD/CAM system. Materials and Methods: Thirty non‐carious human mandibular molar teeth were used. The teeth were embedded in autopolymerizing acrylic resin blocks. Standard Class I inlay cavities were prepared, and the teeth were randomly divided into three groups (n = 10) to fabricate inlay restorations: (1) a feldspathic‐ceramic group, (2) a resin nano‐ceramic group, and (3) a leucite glass‐ceramic group. Optical impressions were made with CEREC software, and the restorations were designed and then milled. The inlays were adhesively cemented with a dual‐polymerizing resin cement and left in distilled water at room temperature for 1 week. Color measurements were performed with a spectrophotometer before and after accelerated aging in a weathering machine with a total energy of 150 kJ/m 2 . Changes in color (∆E, ∆L, ∆a, ∆b, ∆C) were determined using the CIE L*a*b* system. The results were assessed using a one‐way ANOVA and Tukey's HSD test ( p = 0.05). Results: The color changes of the materials ranged from 2.1 to 9.29. The highest color change was seen in the resin nano‐ceramic material. This change was not clinically acceptable (∆E > 5.5). No significant differences were found in the ∆L and ∆a values of the test groups. Conclusions: Color changes were observed in each evaluated material after accelerated aging. All CAD/CAM inlays became darker in appearance, more saturated, a little reddish, and more yellow.