Determinants of electrical resistance change of in situ PPy-polymerized stretch plain woven fabric under uniaxial tensile strain. Issue 9 (2nd September 2017) - Hu, Jiyong
Abstract: Although the conductive stretchable woven fabric has been widely used as the sensitive material of strain sensors monitoring human motion, it is lack of a deep understanding of the determinants of its electrical resistance change under uniaxial tensile strain. This study chose two kinds of typical stretchable plain woven fabric, i.e. cotton/spandex core-spun yarn fabric and polyester/spandex filament yarn fabric, and they were coated by in situ polymerization of polypyrrole. Their electromechanical responses under certain uniaxial tensile loadings were measured and compared. Meanwhile, by a multi-architecture analysis, i.e. the intrinsic resistance of yarns, the contact resistance of interlacing yarns and the contact resistance of adjacent yarns in parallel, several hypotheses were proposed and tested to determine the determinants of electrical resistance change under tensile strains. The results showed that the resistance change in woven fabric with in situ polymerization of polypyrrole mainly depends on the contact resistance of the adjacent conductive yarns in tensile direction, and the electromechanical responses of the cotton/spandex core spun yarn are significantly different from those of the polyester/spandex filament yarn. It was concluded that the conductive yarn density and fabric structure are critical parameters of woven fabric as resistive strain sensor.